Has eines neues cockpit abdecknung gemakt.
http://img472.imageshack.us/my.php?image=billede9456du.jpg
Grüss Michael
Du siehst das Forum als Gast - als registriertes Mitglied stehen dir alle Forenbereiche zur Verfügung. Wir freuen uns auf dich!
Has eines neues cockpit abdecknung gemakt.
http://img472.imageshack.us/my.php?image=billede9456du.jpg
Grüss Michael
@ Michael,
Feine Arbeit !!!!
Selber gemacht? Toll !
Schwer? Erzähl mal
Das sieht ja mal richtig gut aus
Wie hast des gemacht?
Ja ser schwer den form zu finden. Die platte sind holtz mit modelflug carbonlook cover abdeckt.
grüss Michael
Ja die Form kann man sich auch selbst zuschneiden, aber wie hast des festgemacht?
Ein und einhalbes tag mit, Try and try and try again!!!
Michael
Feine Sache! Hat sich der Aufwand wohl gelohnt
Net schlecht Michael... Das sieht mal edel aus!
nice ... sieht cht fein aus :P:P:P:P
Hab ich mir auch gebastelt, nur aus Riffelblech passend zur Gesamtoptik :D. Jetzt ist auch das hässliche Loch nicht mehr zu sehen
http://img163.imageshack.us/my.php?image=127xj.jpg
Hallo Michael
Gefällt mir super.
Hast du deine Schablone noch?
Es wäre echt Traumhaft wenn du so nett wärst sie ein zu scannen,
hier auf dem Board sind bestimmt noch mehr die Interresse hätten
sich auch so was zu basteln.
Der Cabon Look hat was.
gruß
Bora
Sieht wirklich total klasse aus mit dem Riffelblech!!!
Das ist doch mal eine echt gelungene Gesamtoptik...
Ja, so ne Schablone hier rein stellen, das wäre nicht schlecht.
Ja ich has ein schablonen. Ich kan ein kopi den schablonen senden ob etwas ein scanner haben.
Unter den cockpit abdecknung muss 2 ungefair 10mm screiben leigen.
I an better in english (sorry for my german)
I have a copy of the cockpit plate, if anyone have a scanner so that the scan can be placed on the forum, I can send him a copy.
The plate is 98% ok, need only minor ajustments to fit inside the cockpit (I have placed some small rubberparts between the cockpit and the plate to reduce noise from vibration). Washers about 10 mm thick should be placed under the plate.
The plate is a bit tricky to get in possition but it is possible. My plate is of 2.5 mm wood and covered with carbon look cover used to cover model airplanes.
Regards Michael
Hallo Michael
Sorry for my English
A Copy from your Cockpit plate is very good.
I can Scan the Copy of this Plate for the other User on this board.
My E-Mail: meynor@web.de.
Thank you Michael for the Cooperation
Hi Bora
Ich haben gestern den schableon zu dich schicken.
Michael
Hi Michael
Thank you.
I Have verry Loaded the Stencil onto the Database.
Habe die Schablone erhalten und sie in die Datenbank hochgeladen.
Sach ma, wo haste dat Dingen denn abgelegt...? Find da nix...
finde leider auch nichts, kontorllier bitte nochmal ob du sie wirklich hochgeladen hast
danke